Beep Codes - Dell Precision 360 Installierung Und Schnellreferenzhandbuch

If you run a test from the Custom Test or Symptom Tree option, click the applicable
3
tab described in the following table for more information.
Tab
Results
Errors
Help
Configuration
Parameters
When the tests are completed, if you are running the Dell Diagnostics from the
4
Drivers and Utilities CD, remove the CD.
Close the test screen to return to the Main Menu screen. To exit the Dell Diagnostics
5
and restart the computer, close the Main Menu screen.

Beep Codes

Your computer might emit a series of beeps that identify a problem. One possible series
(code 1-3-1) consists of one beep, a burst of three beeps, and then one beep. This series tell
you that the computer encountered a memory problem.
If a beep code is emitted, write it down and look it up under "Beep Codes" in the User's
Guide.
Function
Displays the results of the test and any error conditions
encountered.
Displays error conditions encountered, error codes,
and the problem description.
Describes the test and may indicate requirements for
running the test.
Displays your hardware configuration for the selected
device.
The Dell Diagnostics obtains configuration
information for all devices from system setup, memory,
and various internal tests, and it displays the
information in the device list in the left pane of the
screen. The device list may not display the names of all
the components installed on your computer or all
devices attached to your computer.
Allows you to customize the test by changing the test
settings.
Setup and Quick Re ference Guide
27