Recording Edit; Long Time Recording; Pause During Recording - Octagon SF 1008 HD - INTELLIGENCE Bedienungsanleitung

1.2 Recording Edit

Press the REC button while recording to see the recording message window.
Pause : Select Pause Recording then press OK to pause the current recording process.
Duration : Set recording duration. Press LEFT/RIGHT ARROW button to change recording duration.
Stop Position :
Set the finishing time of recording.
- End of current event : finish recording at the end of current
event
- End of next event : finish recording at the end of next
event.
- Not Available : EPG is not available.
Record Slot : When you are recording 2 services, you can set
Primary / Secondary with Left/Right ARROW button. Press
OK button to go to the recording service.
NOTE : STB can record up to two different services only in
the same TP.

1.3 Long Time recording

During lengthy time recording processes of 4GB(Giga Byte) or more, additional files may be created per
every 4GB. (For example; aaa.ts, aaa.ts1, aaa.ts2... and so on).
You must remember not to erase any of duplicated file. These files are only able to be viewed with your
PC not with the receiver (STB).

1.4 Pause during recording

When the PAUSE button is pressed during recording, only the
live video is paused, but recording is continued at the selected
recording device.
(Menu > Configuration > Recording Option > Record Device)
Press PAUSE button once again and event will resume from
the pause time.
26