AEG StatementLine DDC8271W Benutzerinformation Seite 83

5.6 WiFi connectivity setup
This feature enables you to connect your
appliance to a WiFi network and pair it with
your mobile device. Using this feature, you
can access additional functions, control and
monitor your appliance from your mobile
device, and receive notifications.
To connect the appliance you need:
• Wireless network with the Internet
connection,
• Mobile device connected to your wireless
network.
Frequency/Protocol
Power
Encryption
Installing the app
Take the following steps to connect the
appliance to WiFi :
1. Make sure that the appliance is plugged
into a power socket and turned on.
2. Make sure that your mobile device is
connected to the same wireless network
you want to add your appliance to.
3. To download the app, use your mobile
device's camera to scan the QR code
located on the back cover of the user
manual. You can also download the app
directly from Google Play (Android) or
App Store (iOS).
4. Open the app and register to create an
account.
Configuring the appliance wireless
connection
Follow the instructions in the app to complete
the onboarding process:
1. Make sure the fan and the lighting are
turned off.
2. Press and hold
appliance for 3 seconds, the WiFi
indicator flashes continuously. The
onboarding process is ongoing.
3. Continue to follow the instructions in the
app to complete the onboarding process.
WiFi: 2.4 GHz / 802.11
bgn
WiFi 2.4 GHz: <20 dBm
WPA-PSK, WPA2-PSK,
WPA3-SAE
button on your
To stop the onboarding process, press
the button.
After the successful onboarding, the WiFi
indicator stops flashing and becomes steady.
If the onboarding process is
unsuccessful, the WiFi indicator flashes
rapidly for 6 seconds and then turns off.
Repeat the procedure.
Each time the action is performed using
the app, the WiFi indicator blinks 3 times.
Disabling / Enabling the appliance
wireless connection
To temporarily disable the WiFi connection:
1. Make sure the fan and the lighting are
turned off.
2. Press and hold the
3 seconds. The appliance emits a single
beep and the WiFi indicator blinks twice.
To enable the WiFi connection again:
1. Make sure the fan and the lighting are
turned off.
2. Press and hold the
3 seconds. The appliance emits a single
beep and the WiFi indicator blinks once.
Resetting the appliance wireless
connection
To offboard the WiFi network, press and hold
the and buttons for 3 seconds. The
WiFi indicator blinks twice and the appliance
emits a single beep upon the successful
reset.
This action results in the removal of the
appliance from the WiFi network. To re-
establish the connection, repeat all the steps
described in the 'Configuring the appliance
wireless connection' section.
83
and buttons for
and buttons for