Attaching The Toroidal Ferrite Core To The Power Cord; Connecting The Fm Antenna; Installing The Cradle Stand - Samsung HT-E8200 Bedienungsanleitung

Connections

Attaching the Toroidal Ferrite Core to the Power Cord

If you attach a Toroidal ferrite core to the power cord, it will help to prevent RF interference from radio
signals.
1. Pull the fixing tab of the Toroidal ferrite core to open it.
2. Make a loop twice in the power cord.
3. Attach the Toroidal ferrite core to the power cord as the figure shows and press it until it clicks.

Connecting the FM Antenna

1 . Connect the FM antenna supplied to
the FM ANT Jack.
2 . Slowly move the antenna wire
around until you find a location where
reception is good, then fasten it to a
wall or other rigid surface.
| NOTE |
\ This product does not receive AM broadcasts.

Installing the Cradle Stand

1 . Put the 3 bumps on the product into
the three holes on the cradle stand.
2 . Put the supplied a screw in the
product and rotate them clockwise
with screw driver.
16
|
English
HT-E8200_XU_0315.indd 16 HT-E8200_XU_0315.indd 16
<Main Unit>
FM Antenna
(supplied)
I D S E T
<Subwoofer>
3 bumps
Screw
2012-03-15 오후 1:10:32 2012-03-15 오후 1:10:32