Werbung
Verfügbare Sprachen
Verfügbare Sprachen
During usual operation insert the earphone's cable (not included) into the matching
'PHONES' socket of the unit. Now you can hear the sound exported to your
earphones.
Note: Adjust the volume lever lower during the PHONES operation.
To prevent possible hearing damage, do not listen at high volume levels for long
periods.
You can connect the unit to an external amplifier or record player (such as a tape recorder) via
the line out jack. To do this, connect the device to a conventional RCA cable that you can get
from a specialist dealer.
In DAB mode, press and hold "P-MODE" (Play Mode) button on the remote control for 2-3
seconds, until the display shows "Reset" "Ok" which means the factory reset is successfully.
1. Set the unit in Standby-Mode.
2. Press and hold "PROGRAM" on the unit, "24 HR" is flashing in the display.
3. Set the "12 HR" or "24 HR" mode by pressing the
"PROGRAM", the hour begins flashing.
4. Set the hour by pressing
flashing.
5. Set the minutes by pressing
the time setting is finished.
The current version of the manual can be downloaded from www.soundmaster.de
Technical changes and misprints reserved.
Copyright by Woerlein GmbH, 90556 Cadolzburg,
Duplication only with the permission of Woerlein GmbH
HEADPHONES OPERATION
LINE OUT
FACTORY RESET
MANUAL TIME SETTING
". To confirm press "PROGRAM", the minutes begin
"
" or "
"
. To confirm press "PROGRAM" button again and
"
" or "
"
www.soundmaster.de
11
MCD5600 / English Instruction Manual
"
" or "
"
. To confirm press
Werbung
