Austroflamm WiRCU-BOX Benutzerhandbuch Seite 28

1 | Mounting the WiRCU-BOX
1.3 Downloading and integrating the Austroflamm PelletControl APP
To incorporate the WiRCU-Box into your WLAN network you will need the Austroflamm PelletControl
APP on your SmartDevice.
The WiRCU-Box can only be operated with the Austroflamm PelletControl APP. The current version of
the Austroflamm PelletControl APP is available for download in the APP Store (for iOS operating sys-
tems) and at Google Play (for Android operating systems). You can download the APP by scanning the
relevant QR code:
Android PelletControl
Working with your SMART DEVICE (telephone, Tablet, etc.), and the AUSTROFLAMM PELLET CON-
TROL APP, the WiRCU-Box enables remote access to your heating appliance.
How remote access works:
• Commands are conveyed via the Austroflamm PelletControl APP, the Internet and the Cloud server
to the controls and the operating system (display or control knob). Please be aware: There is a time
delay between inputting the command and its execution.
• For the stoves with rotary control, the rotary control must be positioned at 3 o'clock for the WLAN
box to work.
• If you connect the WiRCU-Box to a WLAN modem/router/Smartphone that is operated with mo-
bile data, please bear in mind the additional costs for data transmission.
1.3.1 How to create the connection to your WLAN network using an Android device
• Enable WLAN on your Smartphone.
• Launch the Austroflamm PelletControl APP.
• The instructions for setting up the WiRCU-Box are displayed in the language set for your SMART
DEVICE (see Section Changing the APP language displayed [}on page 41]).
• Read and confirm the end user licence agreement.
• Carefully carry out the following steps.
28
EN
iOS PelletControl
WiRCU-BOX