Basic Settings (System Set); Cleaning; Specifications - IMG STAGE LINE MATRIX-915LED Bedlenungsanleitung

18 CH 21 CH 50 CH Function
13 brightness of red
14 brightness of green
15 brightness of blue
16 brightness of white
13 LED 1
14 LED 2
15 LED 3
16 LED 4
17 LED 5
18 LED 6
19 LED 7
20 LED 8
21 LED 9
13, 14
LED 1
15, 16
17, 18
LED 2
19, 20
21, 22
LED 3
23, 24
25, 26
LED 4
27, 28
29, 30
LED 5
31, 32
33, 34
LED 6
35, 36
37, 38
LED 7
39, 40
41, 42
LED 8
43, 44
45, 46
LED 9
47, 48
000 – 007 colour via CH13 – 16 / 48
008 – 127 colours 1 – 31
17 49
128 – 191 running light programs 1 – 16
192 – 255 colour change programs 1 – 16
18 50 program speed
Fig. 9 Functions in 18-channel, 21-channel and
50-channel modes

4.5 Basic settings (System Set)

Use the menu „System Set" to make the fol-
lowing basic settings:
Menu item Function
On = The display backlight is always on .
Off = The display backlight is switched
Back Light
off after 30 seconds when no
button is pressed .
Modes 1 – 4: Slowness of LEDs to simu-
late conventional lamps when changing
Dimmer Curve the level of brightness:
1 = slow ... 4 = slightly slow
Also refer to menu item "Dimmer Speed" .
No = normal pan
Pan Inverse
Yes = inverse pan
for all LEDs
31 programmed colours
in steps of 8 DMX values
respectively:
000 – 007 LED off
008 – 015 red
016 – 023 pink
024 – 031 orange
032 – 039 yellow
040 – 047 green-yellow
...
246 – 254 pale pink
255 cool white
red, green
blue, white
red, green
blue, white
red, green
blue, white
red, green
blue, white
red, green
blue, white
red, green
blue, white
red, green
blue, white
red, green
blue, white
red, green
blue, white
Menu item Function
No = normal tilt
Tilt Inverse
Yes = inverse tilt
No = The setting "Dimmer Curve" is
Dimmer Speed activated .
Yes = LEDs not slow
No = no delay
Function Delay
1 s, 2 s, 3 s delay for reset
Red, Green, Blue 125 ... 255:
The maximum possible brightness of
the colours red, green and blue can be
White Balance adjusted . This can be used to com-
Set pensate differences in the shade of
white to other light effect units if these
units are controlled together with the
MATRIX-915LED .
semibold = reset (factory setting), refer to DMX channel
10 or 11 or main menu (Fig . 4)
Fig. 10 Basic settings

5 Cleaning

Clean the LED lenses at regular intervals to
ensure that light will be emitted at maximum
brightness . Before cleaning, disconnect the
mains plug from the socket. Only use a soft
clean cloth and a mild detergent . Then wipe
the lenses dry .
For cleaning the housing, only use a soft
clean cloth . Never use any fluid; it may leak into
the unit and damage it .

6 Specifications

Light source: . . . . . . . . . 9 × 4in1 LED, 15 W
Individual colours: . . . . red, green, blue, white
Beam angle: . . . . . . . . 8°
DMX 512
Number of channels: . . optional: 50, 21, 18, 11, 1
Connections:. . . . . . . . XLR, 3 poles (1 = ground,
Power supply: . . . . . . . . 230 V~ / 50 Hz
Power consumption: . . . 185 VA max.
Dimensions: . . . . . . . . . 280 × 355 × 170 mm
Weight: . . . . . . . . . . . . . 6.8 kg
Subject to technical modification .
All rights reserved by MONACOR
& Co. KG. No part of this instruction manual may be
reproduced in any form or by any means for any com­
mercial use.
2 = DMX–, 3 = DMX+)
INTERNATIONAL GmbH
®
15