Z-EDGE Z3Pro Bedienungsanleitung Seite 15

3.6 Parking Mode
With Parking Mode and G-Sensor enabled, if vibration is detected, the camera
will automatically turn on and start recording(in black screen). If no more motion
or vibration is detected within 30 seconds, the camera will automatically return to
standby mode(in black screen). All recordings are automatically protected from
being overwritten.
Enable/disable feature: Menu > Car Monitoring > Parking Mode
Please Note:
When the folder of protected videos (30% SD card capacity) is full, the protected
files will be overwritten with newly recorded protected files.
3.7 Vibration Detection (G-Sensor)
The camera features sense for unusual impacts or collisions detected by the
built-in G-Sensor. It automatically triggers the Emergency Video Protection with
enabled G-Sensor.
To Set the sensitivity to automatically trigger these features with slight or strong
vibrations (feature can also be turned Off): Menu > G-Sensor
3.8 Taking a Snapshot
Press Left-arrow Button(12) once to take a snapshot while recording.
3.9 Playback Videos & Photos
• In standby mode, press the Left-arrow Button(13) to enter Playback folder.
• Press the Left-arrow & Right-arrow Buttons(12 & 13) to select between Normal
Video, Emergency File, and Photo. Press the OK Button(14) to confirm.
• Press the Left-arrow & Right-arrow Buttons(12 & 13) to select the previous or
next file.
• Press the Power Button(11) to return to the previous menu.
• Press the Power Button(11) to exit.
-11-