Z-EDGE Z3Pro Bedienungsanleitung Seite 11

2.4 Connecting to Power
Use only the supplied car charger to power the dash cam .
1. Plug the Micro USB port of the
USB charging cable into the car
dash cam Micro USB Port (8).
2. Plug the other end into the car
charger, and insert it into your
vehicles lighter socket.
2.5 Powering the Dash Cam
Automatic Power
• Once the vehicle's engine is switched on, the dash cam will automatically
power on.
• When the vehicle engine is switched off, the dash cam will automatically
save the recording and power off.
Manual Power
• To manually turn the power on, press and hold the Power Button (11) for 3
seconds.
• To manually turn the power off, press and hold the Power Button (11) for 3
seconds.
-7-