Z-EDGE Z3Pro Bedienungsanleitung Seite 14

No. Item
10 Camera
11 Microphone
12 Stop Recording Press OK Button to stop recording.
13 Setting Menu
14 Playback
15 Display Switch
16 Start Recording Press OK Button to start recording.
3.3 Adjusting the Settings
Customize the video recording, photo and other general settings via the on
screen display (OSD) menus:
• If the camera is in screensaver status, press any button to wake up the device.
• If the device is recording, press the OK Button(14) to stop recording and enter
the setting menu.
• Press the Left-arrow and Right-arrow Buttons(12 & 13) to select a menu option.
• Press the OK Button(14) to select the desired setting.
3.4 Loop Recording
Videos are recorded and saved to the memory card in set intervals. Once the
memory card is full, Loop Recording automatically overwrites the earliest
unprotected saved file. This prevents long duration video clips from being lost
in a single overwrite.Video files can be saved to the memory card in 1, 3 or 5 mins
intervals: Menu > Loop Clip Time
3.5 Emergency Video Protection
If G-Sensor is activated and senses an unusual impact or collision the dash cam
will automatically protect the currently recorded video file from being overwritten.
An icon appears to indicate the current recording is protected. To manually
protect a video file during recording, press the Power Button(11) once.
Description
Press Left-arrow Button to take a snapshot.
Press Right-arrow Button to enable/disable audio
recording.
Press the menu button to enter the setting menu.
Press Left-arrow Button to playback videos/photos.
Press Right-arrow button to change display view
on the screen.
-10-