Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Restore factory settings
9
Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the key ring remote
control, please proceed as follows:
•
Open the battery compartment (G) at the rear
by pushing the battery compartment cover away
from the device. You will need to apply some
pressure to do this (see figure 2).
•
This will open the catch; you can then swing
open the battery compartment cover. The cover
will stay connected to the housing.
•
Remove the old battery.
•
Insert the battery ensuring that the polarity is
correct (see figure 4) while pressing and holding
down the system button (F) for 4s with a pointed
object (e.g. a pen) at the same time, until the de-
vice LED (A) will quickly start flashing orange (see
figure 5).
•
Release the system button again.
•
Press and hold down the system button again for
4s (see figure 5), until the device LED lights up
green.
•
Release the system button to finish the proce-
dure.
The device will perform a restart.
36
Werbung
