Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (F)
shortly (see figure 3).
•
To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
•
Please wait until teach-in is completed.
If teaching-in was successful, the device LED (A)
•
lights up green. The device is now ready for use.
If the device LED lights up red, please try again.
•
In the app, select in which applications you want
to use your device.
•
Allocate the device to a room and give the device
a name.
6
Operation
Once you have taught-in the Homematic IP Key Ring Re-
mote Control, you can control other devices easily using
two pairs of buttons (button pair 1 and button pair 2). The
buttons of each pair represent a single unit for the device
you wish to control using the key ring remote control.
For example, you can use the first button pair (B and C)
to switch a lighting actuator on or off, and use the sec-
30
Werbung
