Settings And Adjustments - Bellcome Standard 3.5”VIDEOTÜRSPRECHANLAGEN SET1 Familie Benutzerhandbuch

RINGING VOLUME
ADJUSTMENT
Terminal during call
RINGER OFF (MUTE)
Terminal in stand-by or
during call
ANSWERING THE CALL
TALK
TALK VOLUME
ADJUSTMENT
Terminal during talk
END TALK without
access
ACCESS GRANTING
Terminal in stand-by or
during call, talk or monitoring
VIDEO & AUDIO
MONITORING
Terminal in stand-by

6.5.2 Settings and adjustments

You can change any standard settings of the terminal by the following procedures:
VIDEO IMAGE
ADJUSTMENT
Successive short touches of
2 x [ BEEP ]. With the next touch, the volume restarts from level 1.
This adjustment won`t be memorized, the set level has priority.
Long press of
The terminal has the ringer off and the LED remains red.
Step 1
The call will be signaled by
video image.
For reversing MUTE status, short touch of
Step 2
LED turning white.
Short touch of
Hands-free conversation, without touching any key. The talk duration
is max. 2 min.
Successive short touches of
in 7 levels. The maximum level is signaled with 2 x [
With the next touch, the volume restarts from level 1.
Another short touch of
From stand-by Long press of
During call, talk or monitoring
The access is signaled acoustically also, with a specific confirmation
song and the bidirectional audio communication remains opened
10 more sec.
Short touch of
* Each short touch of
If the image on the display is not ok, you can adjust in this order:
1.Impedance adjustment; 2.Brightness; 3.Chrominance, available on
the terminal's back.
.The maximum level is signaled with
[ BEEEEP ] and LED turning red.
Talk is initiated.
Increasing the talk volume
.
.
Short touch of
Video and bidirectional talk for max. 10 sec.
changes the video camera (in case of additional cameras in the system).
28
blinking white and
[
BEEEEP
BEEP ].
any time.
] and