Bellcome Standard 3.5”VIDEOTÜRSPRECHANLAGEN SET1 Familie Benutzerhandbuch Seite 29

6.4.2 Programming the panel address
The panel is already programmed with address 1, which is mandatory for the correct
functioning of the system. The programming is necessary only if the address 1 is changed by
mistake during installation.
Step 1 Central unit SCU
Outdoor panel
Step 2
VPT
Step 3
Central unit SCU
Any error during programming is signaled with [
6.5. Use of the video terminal (VTT)
3.5 inches color display
The factory standard settings are the following:
Ringtone
Ringing duration
Ringing volume
6.5.1 Functioning
STAND-BY
CALL
CALL from the doorbell
PROG
Long press of PROG.
Long press of
Name 1
- For panel address 1 - 1 short touch of
PROG
Press PROG.
Ding-dong (first in the list)
2 calls
Level 7 from 7
The keyboard is off.
When called from the outdoor panel, the terminal rings, the
key blinks white and the video image of the visitor is displayed.
The terminal rings with the specific doorbell ringtone.
The red LED turns on.
[ BEEEEP ]. The panel goes in programming.
The red LED turns off.
]. The procedure must be repeated from Step 2.
BEEEEP
Call answering
+ Audio-Video Monitoring
(ringtone setting)
Access granting
(ringing duration setting)
Talk volume + mute
(ringing volume setting)
27
1 x [ BEEP ] Step 3.