Use Of The Video Door Phone - Bellcome Standard 3.5”VIDEOTÜRSPRECHANLAGEN SET1 Familie Benutzerhandbuch

6

USE OF THE VIDEO DOOR PHONE

6.1. Safety instructions during use
DO NOT HIT the products with hard objects.
è
PROTECT THE PRODUCTS against lime and dust during renovation.
è
6.2. Significance of the acoustic signals / use of the key s
[ BEEP ]
2 x [ BEEP ]
[ BEEEEP ]
[ ]
BEEEEP
Call tone in the
terminal (VTT)
Call tone in the
panel (VPT)
Access tone in the
terminal (VTT)
Access tone in the
panel (VPT)
Doorbell tone in the
terminal (VTT)
Short touch of a key
Long press of 1 or 2
keys simultaneously
6.3. The features of the central unit (SCU)
*programming
button PROG.
red LED of PROG.
(programming mode or
defect within the system)
TIME:
Lock timing adjustment
Short confirmation beep with a high tone.
Sequence of 2 short beeps with a high tone for confirmation.
Long confirmation beep with a high tone.
Long error beep with a low tone.
5 settable ringtones. When called, the terminal plays the selected
ringtone.
Each touch of is signaled with a ding-dong.
When access is granted, the terminal plays a confirmation tone.
When access is granted, the panel emits a sequence of beeps
for confirmation.
Dedicated preset doorbell tone
Max. 1 sec. Every touch is confirmed with 1 x [
More than 2 sec. It is confirmed with 1 x [
PROG S1 S2 S3
STROMVERSORGUNGSEINHEIT
(SCU.VDR02.BLW)
SCHLOSS-
EINGANG: 230V Wechselspannung 50Hz, 0.4A
ÖFFNUNGS- 2 3
4
1
AUSGANG 1: 14V, 2A Gleichspannung (S1)
ZEIT
5
(sekunden)
AUSGANG 2: 14V, 0.5A Gleichspannung (S2)
6
10
7
BATTERIESTATUS: S3
9
8
(if a doorbell is connected to the terminal)
S1: GREEN
S2: GREEN
S3: GREEN/RED Battery status
ACHTUNG!
Lebensgefahr,
Gerät nicht öffnen!
GEFAHR EINES
STROMSCHLAGS!
25
BEEP ].
BEEEEP ].
Protection lid 1 for electrical
connections
+14V - GND
(+14V/2Ad.c.)
(+14V/0.5Ad.c.)
+Uv - GNV
Front lid
Protection lid 2 for connections
EN
.