BeneCheck Uni Gebrauchsanleitung Seite 20

• Test incomplete due to
removing the strip during
measuring.
• Improper code strip.
• Test result is higher than
the range listed on
Chapter 9.
• Test result is lower than
the range listed on
Chapter 9.
12
Follow Chapter 3.1 and repeat the test with a
new strip. Do not remove the strip before the
test is completed.
Repeat the coding procedure (Chapter 2.3).
If the problem persists, please contact local
distributor for service.
Follow Chapter 3.1 and repeat the test with
a new strip. If the problem persists, please
contact local distributor for service.
Follow Chapter 3.1 and repeat the test with
a new strip. If the problem persists, please
contact local distributor for service.