Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Transmission Function
Chapter 6
The meter provides Bluetooth transmission function.
It can transmit test results to connected device
wirelessly via Bluetooth.
The screen show "
• The meter with Bluetooth 4.0 can apply to IOS 6, Android 4 and above.
• This meter complies with the emission and immunity requirements of IEC 61326-2-6.
• The meter and the transmission function may be interfered while other device is operating
nearby. Ex: mobile phone, wireless internet, etc.
• If the transmission has been interfered. Please keep the meter away from the source of
interference or turn off the interfering device.
• Please make sure the meter and the receiving device are placed within a reasonable
distance (less than five meters) during transmission via Bluetooth.
• Please do not share the meter with other people if you are using Bluetooth transmission
function. The test results from other people will also transmit to the receiving device, and it
will influence your test record.
• The Bluetooth transmission function may not work on certain types of mobile phone due to
the compatibility of Android systems.
• Frequency range: 2402 – 2480MHz. RF power: -2.21 dBm @ room temperature Typical.
Warning: If the meter is paired with a mobile device and Bluetooth is on, your test
results will be sent to the paired device. Please check that the meter results are the
same as those displayed on the paired device.
" means Bluetooth transmission function is working.
for BSU01D
UA
UA
9
Werbung
