Learning - Beeper Speed Einrichtungs- & Benutzungshandbuch

LEARNING

PRESENTATION OF ORDERS
Refs : FX8
Refs : FX10
Battery level
• Press the ON / OFF button on the display of your scooter for a few seconds to turn it on or off
• To change speed, short press the "M" button
Refs : FX11
Régulateur de vitesse
• Press the ON/OFF button located on the handlebar of your scooter for 3 seconds to turn the display on or off
• To change speed, briefly press the + or - button
• Briefly press the ON/OFF button to switch on the lights
*Press the "+" button for 3 seconds to activate or deactivate the double motor (only available for models refs. FX11-7 and FX11-10)
FIRST STEPS
1. Press the ON / OFF button on your scooter for a few seconds.
2. Place one foot on the platform, then kick-start your scooter with the other foot.
3. When you have enough momentum, place the second foot on the platform.
4. Select your speed and lightly press the accelerator.
5. Press the accelerator to move forward.
6. Apply the brakes to slow down.
7. Once your scooter has stopped, you can get off and turn it off.
REMOTE CONTROL (only ref. FX10)
Unlocking Remote activation
Locking
Alarm
Mileage
Error code
Single or
Double
engine*
Battery level
Selected report
km/h
km
M
Gear selected
Speed km/h
Activation of LED lights
Pedestrian mode
Mileage & Multifunction Display
Lock the scooter.
In the event of theft, the alarm sounds and the rear wheel
locks
Unlock the scooter.
Activate the alarm remotely. Press again to stop the alarm
Double tap to turn on your scooter remotely. Press
off the scooter.
28
Speed km/h
ON/OFF button
Speed selection
to turn