Battery Maintenance; Safety Instructions; Battery Charging; Charger Maintenance - Beeper Speed Einrichtungs- & Benutzungshandbuch

BATTERY MAINTENANCE

1. Battery Safety Instructions
• Before first use, please charge your battery to the maximum.
• Please recharge your battery after each use.
• Please recharge your battery before it is completely discharged.
• To have complete satisfaction with your vehicle, make sure it is at least 50% charged.
• If you store your vehicle, please ensure that the battery is fully charged.
• Please do not exceed 30 days without recharging your battery.
• Please use the supplied charger corresponding to your vehicle's battery. • Please do not store your vehicle at a
temperature below 0°C or in direct sunlight.
• The battery should be kept out of the reach of children. If any battery components are swallowed, seek medical
attention immediately.
• Improper charging, damage, humidity or overheating may emit smoke, explode, cause a strong heat source or cause a
fire on the battery.
• Do not leave your vehicle charging unattended.
• Do not use the battery if it is damaged, then please replace it. To reduce the risk of fire or burns, do not dispose of it
with household waste. In order to preserve the environment, the battery must be deposited at the collection points in
force.

2. Battery charging

To maintain the proper functioning of your EDP, we advise you to charge the battery after each use. Here are some
maintenance tips for your safety and to help optimize the lifespan of your product.
km/h
DIS
On the display, a full
gauge = the scooter is
Red LED = charging Green LED = recharged
100% charged.
To charge your EDP, plug the charger tip into the space indicated on the battery, then the socket into the mains.
• Be sure to dry the product and the charging connector before plugging in the charger.
• The bars located on the display show you the charge level of your vehicle.
• The more the battery is used, the longer the recharge time may become.
• Battery life varies depending on temperature.

CHARGER MAINTENANCE

• The charger only works with the AC adapter dedicated to it. Using another adapter may damage the product. • The
adapter must be plugged into a household outlet and easily accessible. • Do not cover, expose to a source of heat or
humidity and use in a ventilated area.
• Please unplug your charger when not in use. • Do not use your charger if it is damaged.
• The external flexible cable of this transformer cannot be replaced. If the cord is damaged, the transformer should be
discarded. • Never connect or disconnect the battery connection terminals while the power cable is still connected to
the mains. Always remove the plug from the socket first. • Do not store your mains charger in low temperature areas.
When it returns to normal temperature, humidity can form inside the device and damage the electronic circuits. •
Unplug the charger during lightning storms or long periods of non-use to avoid damage. • The charger must only be
used with the power supply supplied with the scooter
• Charger reference compatible with scooter models:
• FX8-G2-6, FX8-G2-10, FX8-G2-13: FX8-SP02
• FX10-G2-8, FX10-G2-10, FX10-G2-13, FX11-5, FX11-7: FX11-SP02/48
• FX11-10: FX11-SP02/60
24