Werbung
Ensure the on-site earthing system is in full working order. Check the line voltage (Vol-
ts) and frequency (Hz) match the data shown on the appliance (see nameplate and
wiring diagram). The appliance has an electric cable to which a multi-pin plug can be
connected. Connect the plug to a wall switch fitted with a residual-current device.
3.4
Use
a
CAUTION! HAZARD
– Before using the equipment, ensure that the top guards are
intact and the interlock is efficient. Do not attempt to remove
the interlock or tamper with it.
– Never run the equipment when it is empty.
– Do not smoke or use open flame appliances in the proximity
of the equipment.
3.4.1
Description of controls
MX25
Start button
IT
EN
FR
Locking ring nut
DE
Mixing tool
ES
PT
1 Start button - press to start the appliance and release to stop the appliance.
RU
2 Speed control dial (models MX40-FX40 only) - the speed control dial has a dual
function: adjusting the appliance speed and skipping directly to maximum speed.
When turning the dial, you will hear a click to indicate the switch between the two
AR
functions.
a) Adjustable speed (use with whisking tool only):
16
USING THE EQUIPMENT
MX40-MX42S
Motor unit
Speed control
Start button
Motor unit
Locking ring nut
Mixing tool
FX40-FX42S
Speed control
(FX40 only)
Start button
Motor unit
Locking ring nut
Whisking tool (FX-MX40
only)
Werbung
