Tivoli Audio Model Two Digital Bedienungsanleitung Seite 8

9. Tap "Set Up new Device" or "+ Add" at the bottom of the screen and follow the on-screen directions.
10. Wait for the app to scan for available speakers, then select the M2D you would like to setup.
11. Confirm you heard the noise.
12. In the next screen, select the correct Wi-Fi address and enter the Wi-Fi password. You may also change the speakers'
name. Then tap Next.
13. Wait for your device to connect and check for updates. This process may take a few minutes.
14. You will now be prompted to activate Google Cast. See section "Activating Google Cast" to learn more.
15. Your speaker is now ready to use with Spotify Connect, Tidal Connect or Apple AirPlay.
Activating Google Cast
Tivoli Audio Setup App is required to activate Google Cast on Android and iOS Devices.
1. Once your Model Two Digital is connected to Wi-Fi, you may activate Google Cast.
2. When first connecting a Model Two Digital to Wi-Fi, you will be prompted to activate Google Cast. You may also
activate Google Cast later by navigating to the Device Settings Menu and tapping on Google Cast setting.
3. Review the Google Terms of Service, tap "Accept" to proceed.
4. Decide whether or not you would like to opt into Google's crash reports, there is no wrong answer!
5. You will now be directed to the Google Home app.
6. Look for your Model Two Digital in Devices tab under Local Devices.
7. Add this speaker to the Home and Room of your choice.
8. Your M2D is now ready to use with Google Cast. Stream the entertainment you love from your phone, tablet, or
laptop to your speaker.
How to use Google Cast:
1. Open any Cast-enabled app.
2. Select the CAST button in the app.
3. Select the Model Two Digital.
4. Press the PLAY button in the app.
For additional support, please visit support.google.com/chromecast
How to use Apple AirPlay:
1. Connect your iOS device to the same network as your Model Two Digital.
2. On your iOS device, open the Control Center.
3. Press and hold the audio card in the upper-right corner, then tap AirPlay.
4. Select your Model Two Digital from the list of available AirPlay devices and start playing.
For additional support, please visit support.apple.com
How to use Spotify Connect:
Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.
The Spotify Software is subject to third party licenses found here:
How to use TIDAL Connect:
1.
Play a song and tap on the 'Now Playing' bar.
2.
Tap on the device selector at the top right.
3. Choose a TIDAL Connect-enabled device.
English
https://www.spotify.com/connect/third-party-licenses
7