Tivoli Audio Model Two Digital Bedienungsanleitung Seite 7

Your Model Two Digital can be used as a standalone speaker. Simply use a 3.5mm stereo cable to attach any line or
headphone level source into the AUX input on the back of your speaker. On the front of your speaker, short press the
power knob until the LED is Orange. You can control the volume of the speaker using the volume control on the Model
Two Digital or with the volume control of your audio source.
Pairing
Your Model Two Digital can act as a standalone Bluetooth speaker.
1. Turn on your unit by short pressing the power knob.
2. On your speaker, short press the power knob until the LED Light Bar is Blue.
3. The LED light will flash blue, indicating pairing mode. If your speaker is not in pairing mode, press the BT Button on
the rear of the speaker.
4. Go to the Bluetooth settings on your phone or tablet.
5. Select the device that has a name similar to "Tivoli Audio M2D_XXXXXX".
6. Once the LED Light Bar shines solid blue, you are paired to the radio. After 5 seconds, the light will revert to soft
white.
7. You can begin playing your music via Bluetooth.
Wi-Fi Setup with Apple AirPlay
1. Turn on your unit by short pressing the power knob.
2. Set your speaker to Wi-Fi mode by short pressing the power knob until the LED light is Green. The LED will blink
green, indicating Wi-Fi Setup mode. If your speaker is not in Wi-Fi Setup mode: short press the "Wi-Fi" button on
the rear of the unit.
3. On your iOS device, go to Wi-Fi Settings. Make sure to connect your iOS device to the network that you intend to
use your Model Two Digital.
4. Scroll down to "Set Up New AirPlay Speaker..." and select "Tivoli Audio M2D_XXXXXX".
5. Rename your speaker (recommended) and create a password (optional).
6. Select "Next" and wait for the connection.
7. Wait for the connection confirmation, select "Done".
8. Once connected the LED Light Bar displays solid green. After 5 seconds the light will revert to soft white.
9. Your speaker is now ready to use with AirPlay. With AirPlay, you're in control of your audio.
For additional support, please visit support.apple.com
Wi-Fi Setup with Tivoli Audio Setup App
Required for Android devices to connect M2D to Wi-Fi. If you are connecting your speaker with an iOS device, either
download the Tivoli Audio Setup App or follow the "Wi-Fi Setup with Apple AirPlay" instructions.
1. Install the Tivoli Audio Setup app by downloading app the on your Cast-enabled smart phone or tablet. The Tivoli
Audio Setup app is available for free on the Google Play and Apple App stores.
2. Allow permissions to Wi-Fi, Bluetooth, Nearby Devices and Location While Using the app.
3. Make sure to connect your smart phone/tablet to the same network that you intend to use with your Model Two
Digital with Google Cast.
4. If you have not already done so, turn on your phone's Bluetooth connection. This allows your WiFi information to be
sent reliably to the speaker.
5. Turn on your speaker by short pressing the power knob.
6. Set your speaker to Wi-Fi mode by short pressing the power knob until the LED Light Bar is Green.
7. The LED will blink green, indicating Wi-Fi Setup mode. If your speaker is not in Wi-Fi Setup mode, press the Wi-Fi
button on the rear of the unit.
8. Open the Tivoli Audio Setup app on your smart phone/tablet.
English
Auxiliary Mode
Bluetooth Mode
WiFi Mode
6