Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Unpack and check
3.1 Unpacking the product
WARNING
Risk of suffocation from packaging mate-
rial and from swallowing small parts.
►Dispose of the packaging material in
the household waste according to re-
gulations.
►Store the packaging and small parts re-
quired for repackaging away from mois-
ture and out of reach of children.
NOTICE
Material damage.
Pointed, sharp and scratching objects
can damage the product when opening
the packaging.
►Do not use any pointed, sharp or scrat-
ching objects to open the packaging.
►Be careful with the following work.
1. Remove adhesive and lashing straps by hand
or use scissors.
2. Place the box with the direction arrows poin-
ting upwards.
3. Remove all the parts from the box and place
them on a soft, flat surface.
4. Check the scope of delivery for completeness.
Description
Ice cube machine
Ice cube basket
Ice cube scoop
Operating instructions
4. Set up
Allow the device to rest for about 2 hours after a
change of location so that the electronics can
acclimatise.
4.1 Place of installation
►Select a suitable installation location that
meets the following requirements:
• The installation location is dry and can be venti-
lated regularly.
• The installation site is not permanently exposed
to the sun and strong temperature fluctuations.
• The surface of the installation site is horizontal,
level and non-slip.
12
5. Use
CAUTION
Risk of injury due to improper use and
overloading.
►Use the product in accordance with its in-
Water that has not been cooled for a long
time can lead to the formation of pathogens.
►Change the water in the water tank at
NOTICE
Material damage due to incorrect use.
►Check that the device is intact and
►Do not operate the appliance in the vi-
►Do not leave the appliance unatten-
5.1 First commissioning
1. Open the lid [4].
2. Fill the water tank with fresh, still drinking water
up to the maximum water fill level characteristic.
3. Close the lid.
4. Allow the appliance to acclimatise for approx.
2 hours before using it for the first time.
5. Before connecting, make sure that the mains
voltage and mains frequency of the applian-
ce are identical to those of the mains supply.
Amount
6. Connect the power cable to an easily acces-
1
sible socket.
1
7. Switch the appliance on or off using the „ON /
1
OFF" switch [E].
8. Carry out an initial rinse, see „8.1 Cleaning" on
1
page 13.
5.2 Making ice cubes
1.
Ensure that there is sufficient water in the wa-
ter tank.
Press the „ON / OFF" on/off switch.
2.
3.
Select any ice cube size between S and L by
pressing the „SELECT" button.
►The selected size is shown on the display.
4.
As soon as there is no more water in the water
tank, the appliance stops the production pro-
cess and the „ADD WATER" display lights up.
5.
In this case, top up with fresh, still drinking water.
►The machine stops the production process au-
tomatically as soon as the ice cube basket is
full. „ICE FULL" is displayed.
6.
Remove the ice cubes with the ice scoop.
tended use, see chapter „1.2 Use as inten-
ded" on page 10.
least every 24 hours.
complete before use.
cinity of flammable objects.
ded during operation.
Werbung
