SuperFish AquaVac Gebrauchsanweisung Seite 2

GB
Usage
Screw the cap of the AquaVac open and place two C
LR14 size batteries (not included) with the positive end
down.
For use in a Nano aquarium place the Gravel cleaner
with the transparent connector on the top part. For
larger aquariums, use the telescope tube. Depending on
the depth of your aquarium use a long or short tube.
With the screw on the telescopic tube you can fix the
tube to the correct length.
Place the filter bag or connect the hose to the outlet,
depending on the work you want to carry out in the
aquarium; cleaning or emptying.
Note: the AquaVac will not work properly if it is not
submerged far enough, the water level marking
indicates the correct depth.
With the on/off switch op top of the device, you can
operate the AquaVac.
Maintenance
The filter bag must be cleaned properly with tap water,
after each use.
Remove the batteries from the AquaVac if you do not
use it for a long period of time to prevent battery
discharge and damage.