How To Use The Water Kettle; Cleaning And Maintenance - MIA Aquarius 2200 Bedienungsanleitung

•
Clean the stainless steel surface with a slightly damp cloth and dry
thoroughly.
•
If necessary cook some water, empty and rinse the water kettle afterwards to
remove production residues that might be inside. Always take care not to let
water run into the electric parts of the unit.
•
Switch OFF after this process and unplug.
•
Open the lid empty the appliance and let it cool down.

How to use the water kettle

Caution! Danger of burning! The appliance gets very hot during operation.
During operation of electrical caloric appliances, high temperatures – by
boiling water, hot steam or hot body – are generated, which may cause
injuries. Never open the lid while the unit is in operation! Only touch the
cool touch handle and the release button to open or close! Never touch hot
lid or housing!
Caution! Always keep enough distance to heat or steam sensitive surface,
walls, furniture. Ensure that the cord does not touch hot parts of the
appliance like lid or housing.
Caution! Danger of overheating! Do not run the appliance without water or
with open lid!
Caution! Do not overfill the appliance to avoid overflow of cooking water!
•
In order to fill in water, always lift off the reservoir from the base station.
•
Open the cap and fill the reservoir with cold water. The quantity of water has
to be between MIN and MAX (see water level scale) – don't exceed or under-
run the indicators to avoid overflow of cooking water or overheating the unit.
•
Close the cap carefully until it is locked.
•
Put the appliance onto the power base and switch on the appliance by
switching the ON/OFF switch upward. The control lamp is illuminated.
•
The boiling process can be interrupted at any time by switching OFF manually.
•
The kettle switches off automatically some seconds after the water has boiled.
If you want to reboil the water, it is necessary to let the water cool down a
short time before the appliance can be switched on again.
•
In order to open the lid, press the unlocking button. In order to prevent scald
injuries, pay attention that neither hot water nor hot steam can escape.
•
Note: The appliance has an integrated lime filter. Please ensure that the lime
filter has been fixed properly inside before use. (To assemble the lime filter
see chapter "Decalcification").
•
The appliance is equipped with a safety system and will automatically switch off,
should the kettle be operated accidentally without or with not enough water.

Cleaning and maintenance

Caution! Danger of electrical shock! Always pull the plug before cleaning.
Never immerse the water kettle, cord and base fully into water. The
connector parts must not get wet. Contact of electrical parts with moisture
causes short circuit and damage.
11