Werbung
[EN]QUICK START GUIDE
IMPORTANT!
When first taking your earbuds out of the
packaging, please remove protective film
covering the charge points.
LET'S STAY CHARGED
Note: If your earbuds and charge case do not have any power when
you first unpack them, place the earbuds into the charge case and
plug the charge case into a USB port using the USB C cable [8]
provided.
The Earbuds
A voice prompt "Battery low" allows for 2 minutes play time before
the earbud(s) powers down stating "Battery low, power off". The
2
Earbuds LED Light [2] will flash WHITE once and will then switch off.
Charge the earbuds using the Portable Charging Case [5] .
While charging, each Earbud LED Light [2] will be WHITE and once
fully charged the LED Lights will turn off. Secure the earbuds by
closing the lid.
When the earbuds are placed inside the case and the lid is closed, the
7
charge indicator light (7) will turn WHITE for 4 seconds to indicate
charging and then turn off.
The Portable Charging Case
Always connect the case via the USB C port [6] , to a suitable USB
wall charger, computer USB port or a power bank using the USB C
8
charging cable (8) supplied. Plug the supplied cable into the USB
6
C port [6] on the charge case.
The charge light indicator (7) will blink RED, on and off, to show the
7
case is charging.
[EN]
1
8
5
2
6
TIP: 15 MINUTE QUICK CHARGE
If you're running low on power, charge your earbuds in the case for
15 minutes and get 2 hours extra play time while on the go
LET'S CONNECT
First time pairing
When you open the Portable Charging Case [4] both earbuds
will turn on and connect together. A voice prompt will confirm with
'Power on, pairing'. One Earbud LED Light [2] will flash WHITE to
indicate pairing mode.
Go to the Bluetooth settings on your audio device to select 'MIXX
StreamBuds Custom' from the list. Once paired successfully you
will hear 'Connected' and the Earbud LED Lights [2] will
turn off.
You can now enjoy your music, watch a video or take a call hands
free. The earbuds will automatically reconnect to the last device
they were paired with, confirming 'Connected'.
FACTORY RESET
When in pairing mode, independently 'tap' 4 times until power off
is announced, return bud to case. repeat with other bud. This will
complete the Factory Reset process.
2
5
2
2
[EN]
Werbung
