Secret Lab MAGNUS Pro Montageanleitung Und Benutzerhandbuch Seite 14

ASSEMBLY GUIDE
Calibrating your Desk
Note: Your Motorized Leg Columns have
been lubricated to maintain smooth operation.
Some residue is expected to be seen on the
Leg Columns after a few cycles.
Installing the Secretlab MAGPAD™ (Optional)
Unfasten the centre strip of the
Secretlab MAGPAD. Slide the
Metal Sleeve onto one end of the
Secretlab MAGPAD. Ensure that
the MAGPAD has been fully inserted
into the sleeve. Check that the sleeve
is flushed with the edge of your
Secretlab MAGNUS Pro.
Slide the Standby Switch to the right to
turn the Control Panel on. Press and hold
the button. The display will show "
Do not release the button until a beep is
heard. The calibration process is completed.
".
Standby Switch
(Off Position)
Standby Switch
(On Position)
Align
11