Possible Cause - Vevor Con-1 Bedienungsanleitung

Symptom
"E1" showed on
the display panel
No Heat after few
times normal
heating, still light
on the display
panel
No light on the
display panel
TROUBLESHOOTING

Possible cause

Temperature
sensor's measuring
circuit broken.
Overheat protector's
measuring circuit
broken.
Connection wire
between display
panel and power
panel with faults, or
fuse of the power
panel broken
- 10 -
Remedy
Check the wires to the
temperature sensor and their
connections (see Fig2 and
Fig4) for faults
Press the overheat
protector's reset link inside
the temperature sensor unit.
(see Fig2)
Check whether user choose
sauna heater according to
room size and install
temperature sensor correctly
(see Fig1).
Check the wire's
connections for loosen or bad
connection, Check the fuse of
power panel.