Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
2. Install the clothes dryer horizontally
This dryer must not be placed upside down. When the dryer is installed on
a level floor or table, make sure the surface is sturdy, secure, and not tilted
to keep the dryer level.
3.Optionalinstallation Methods
3.1 Dryer Bracket Installation
When using the dryer with a stand, it must be
ensured that the stand is sturdy and reliable. When
the stand is installed on the ground, it must be
stable and secure, with a strong connection
between the stand and the wall to ensure the
stability of the stand. There should be at least 13 cm
of distance between the stand and the wall (the
stand is an optional accessory).
3.2 Wall-Mounted Dryer Installation
Determine the wall mounting position for the dryer, taking care to ensure
that the space between the top of the dryer and the ceiling is
recommended to be greater than 100mm. lf the installation location is
above a washing machine, leave enough space to open the washing
machine's lid.
a. Secure the hooks to the wall using expansion bolts(M6).
b. Use 4 cross-headflat countersunk self-tapping screws
(4x10,provided) to fix the cabinet hooks to the cabinet.
c. Hang the dryer safely on the hooks.
Distance between hook
screw holes
Note: Before wall-mountedinstallation,
please measure the distance between
the hook screw holes and then proceed
with the installation.
Cabinet
Hooks
Wall-
Mounting
Pillar
6
Werbung
