Brief Description / Scope Of Application; Installation; Mounting; Addressing - Ceag GuideLed SL 13012..022 CG-S Montage- Und Betriebsanleitung

5.1 Brief description / Scope of application

The safety luminaires GuideLED CG-S are suitable for operation on CEAG emergency lighting
systems acc. to EN 50 172, DIN VDE 0100-718 and E DIN VDE 0108-100 . The advanced swit-
ching and monitoring mode is only available in combination with CEAG CG-S-technology.
6. Installation / Operation
For the mounting and operation of electrical apparatus, the respective national safety
regulations as well as the general rules of engineering will have to be observed!

6.1 Mounting

Find the detailed description on the pages 3-4.
6.2 Addressing / Single luminaire monitoring
Special LED-Converter with integrated monitoring module for individual monitoring of lumina-
ries (monitoring of the supply and automatic detection of faulty supply of the LED-module) with
20 adresses. Before fitting the luminaire, the individual luminaires will have to be performed. To
do so, the desired address (1-20) is set on the address switch by means of a suitable screw
driver (arrowhead to no.). If the luminaire should not be monitored, the code 0/0 has to be
selected.
7. Inspection/Maintenance/Repair
Observe the valid regulations for the inspection, maintenance and repair of electrical equipement!
In case of returns you need a RMA - number from us. For further information see
www.ceag.de!
8. Disposal / Recycling
When disposing of faulty equipment, observe the valid regulations for recycling and disposal. Plastic
parts are marked with the appropriate symbols.
Operating Instructions
GuideLed system luminaire
SL 13011...022 CG-S
address switch 1
0
0
0
...
1
1
...
...
2
address switch 2
0
1
2
...
0
1
...
...
0
We reserve the right to make techni-
cal alterations without notice!
CEAG Notlichtsysteme GmbH
address of lamp
Monitoring off
1
2
...
10
11
...
...
20
10