Product Features - Instar In-9808 Bedienungsanleitung

3. Product Features

Hardware
Image Sensor
Wide-Angle Lens
MicroSD Card
PIR Sensor
Mic / Audio Out
Cable entry
Software
Privacy Areas
Alarm Areas
Alarm Triggers
Pre-Recording
Notifications
Smart IoT
Video Recording
Video Stream
Photo Series
Intercom
Connectivity
P2P
DDNS
Cloud
FTP Upload
WPS
WiFi
HTTPS
Go to https://install.instar.com
QFHD Sony STARVIS CMOS Sensor / Resolution 3840 x 2160px
Exchangeable 4.3mm lens with a ~100º diagonal field of view
Max. 1024GB / 1TB (32GB incl.) for alarm or manual recording
Integrated Panasonic passive infrared motion detector
Integrated microphone and audio output (3.5mm Jack)
Individually usable cable entry for power, network and audio
Mask areas for privacy concerns, up to 8 areas
Define up to 8 areas for software motion detection and link with PIR
Supports motion, heat, object and noise detection
Alarm videos start 1-10 seconds before the trigger event
Alarm emails and push (text) notifications in case of an alarm trigger
Smarthome Integration by Alarmserver, MQTT(S) and HTTP(S) API
15 - 60 seconds alarm and/or manual recording on MicroSD
Supported protocols RTSP(S), HTTP(S) (HTML5), ONVIF, MJPEG...
Interval snapshots for website integration or time lapse videos
Two-way audio with our InstarVision app
Free point-2-point connectivity with InstarVision, works with IPv6
Free DDNS address to connect to your camera via the internet
Optional upload & management of alarm videos in the INSTAR Cloud
Upload alarm images / videos to an FTP server (FTP / FTPS / SFTP)
Use WiFi Protected Setup (WPS) to easily establish a WiFi connection
2,4 / 5Ghz WiFi, Wi-Fi 5 802.11ac with WPA2/3 encryption / EAP
Access the WebUI via HTTPS with secure TLS encryption
4-EN