Inhaltszusammenfassung für clage Zip Hydroboil Plus
Seite 1
All manuals and user guides at all-guides.com Gebrauchs- und Montageanleitung Operating and installation instructions Zip Hydroboil Plus ® Zip Hydroboil Plus ® > > >...
Seite 2
All manuals and user guides at all-guides.com Zip Hydroboil® Plus Inhaltsverzeichnis 1. Sicherheitshinweise ................... . 3 2.
Seite 3
Gebrauchs anleitungen sind für den Endanwender bestimmt. Die dem Gerät beigefügten Anleitungen entsprechen dem technischen Stand des Gerätes. Die jeweils aktuelle Ausgabe dieser Anleitung ist online verfügbar unter: www.clage.de/downloads • Vorsicht beim Heben. Das Gerät ist schwer und sollte aus Sicherheitsgründen nicht allein angehoben werden.
Seite 4
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 2. Gerätebeschreibung Der Zip Hydroboil® Plus ist ein elektronischer Kochendwasserautomat für den erhöhten Kochendwasserbedarf in Teeküchen, Kantinen oder Gastronomiebetrieben. Das Zweikammersystem mit Edelstahlbehältern verhindert ein Vermischen von Zulaufwasser und Kochendwasser und garantiert so immer gezapftes Wasser nahe dem Siedepunkt. Zip Hydroboil®...
Seite 5
All manuals and user guides at all-guides.com CLAGE 4. Installation Haubenschrauben Zapfarmatur Gerätehaube Anschlussklemme Bedienfeld Zugentlastung (Durchführungstülle) Auslaufblende Zu beachten sind: • VDE 0100 • EN 806 • Bestimmungen der örtlichen Energie und Wasserversorgungsunternehmen • Technische Daten und Angaben auf dem Typenschild Stellen Sie vor der Installation sicher, dass…...
Seite 6
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 4. Installation Geräte montieren Angaben in mm • Die Unterkante des Auslaufs sollte sich mindestens 280 mm (nominal 360 mm) über 37 (HB Plus 3) 37 (HB Plus 3) der Abtropffläche befinden. (Wenn größere Gefäße befüllt werden sollen, muss der 52 (HB Plus 5) 52 (HB Plus 5) Abstand vergrößert werden.)
Seite 7
All manuals and user guides at all-guides.com CLAGE 4. Installation Installation eines externen Ionenaustauschers Ein externer Ionenaustauscher sollte ab 10 °dH verwendet werden, um die Kalkbildung in dem Heißwassertank des Gerätes zu vermindern und dadurch die Wartungsintervalle zu verlängern. Hinweis: Beachten Sie bei der Installation eines externen Ionentauschers die mitgelieferten Anleitungen des Filterkopfes und der Filterpatrone.
Seite 8
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 4. Installation Elektroanschluss Hydroboil 15, 25 Nur durch den Fachmann! Zu beachten sind: • VDE 0100 • Bestimmungen der örtlichen Energie und Wasserversorgungsunternehmen • Technische Daten und Angaben auf dem Typenschild •...
Seite 9
Hinweis: Das Wasser und der Dampf sind sehr heiß! Verbrühschutz Der Zip Hydroboil Plus ist mit einer Sicherheitsfunktion ausgestattet, die das Risiko einer unbeabsichtigten Bedienung der Zapfarmatur verringert. Bei aktivem Verbrühschutz muss zusätzlich zur Zapfarmatur »A«, der Sicherheitsknopf Verbrühschutz an...
Seite 10
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 5. Bedienung Der Hydroboil verfügt über ein LCDisplay mit vier seitlichen Sensortasten zur Steuerung des Einrichtungs und Bedienmenüs. Hauptbildschirm Der Hydroboil Plus befindet sich standardmäßig im Hauptbildschirm. Dieser kann je nach Einstellungen zwei verschiedene Modi abbilden: 1.
Seite 11
All manuals and user guides at all-guides.com CLAGE 5. Bedienung Hauptmenü Einstellungen Durch Tippen auf die Taste 1 gelangen Sie in das Hauptmenü. Über die Sensortasten können Sie verschiedenen Funktionen auswählen und Untermenüs aufrufen. Je nach Konfigurieren Verlauf der Bedienschritte verändern sich die Symbole zur Navigation im Hauptmenü...
Seite 12
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 5. Bedienung Energiesparen Für einen energieeffizienten Betrieb lassen sich verschiedene Energiesparmodi aus wählen. Das Gerät hält heißes Wasser nur vor, wenn es auch gebraucht wird und ENERGIESPARMODI schaltet zu festgelegten Ruhezeiten ab. Modus Auslöser Modus Auslöser Modus Verhalten...
Seite 13
Kundendienst. Überlastsicherung löst wiederholt aus. Gerät eingeschaltet aber heizt nicht. Möglicher interner Fehler. Kundendienst kontaktieren. Sollte das Gerät weiterhin nicht funktionieren, wenden Sie sich bitte an: CLAGE GmbH Werkskundendienst Pirolweg 1 – 5 21337 Lüneburg Deutschland Fon: +49 4131 890140 Fax: +49 4131 890141...
Seite 14
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 7. Wartung und Pflege Reinigung Die Oberflächen des Gerätes und der Armatur nur mit einem feuchten und hygienisch unbedenklichen Tuch abwischen. Keine scheuernden, lösungsmittel oder chlorhaltigen Reinigungsmittel verwenden. Das Gerät und die Armatur nicht mit einem Wasserstrahl reinigen, da dies die Elektronik beschädigen könnte.
Seite 15
All manuals and user guides at all-guides.com CLAGE 9. Garantie Dieses Gerät ist ein aus hochwertigem Material hergestelltes Präzisionsgerät und wird voraussichtlich viele Jahre störungsfrei seinen Dienst tun. Keine Garantie wird auf die Lebensdauer einer mit dem Gerät installierten Filterpatrone gewährt, da die Patronenlebensdauer je nach Wasserqualität und Wasserverbrauchsrate unterschiedlich sein kann.
Seite 16
All manuals and user guides at all-guides.com Zip Hydroboil® Plus Contents 1. Safety Instructions ................... . .17 2.
Seite 17
The latest version of the instructions can be found online at: www.clage.com/downloads • Caution when lifting. The unit is heavy. For safety reasons, one person should not attempt to lift it on their own.
Seite 18
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 2. Description of Appliance The Zip Hydroboil® Plus is an electronic boiling water system for the increased boiling water demand in tea kitchens, canteens and restaurants. The twochamber system with stainless steel tanks prevents the mixing of cold water and boiling water, thus guaranteeing always tapped water near the boiling point.
Seite 19
All manuals and user guides at all-guides.com CLAGE 4. Installation Hood screws Hood Connecting terminal Control panel Strain relief bush (cable gland) Outlet cover The following regulation must be observed: • VDE 0100 • EN 806 • Installation must comply with all statutory regulations, as well as those of the local electricity and water supply companies.
Seite 20
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 4. Installation Mounting the appliance Dimensions in mm • Position the base of the tap nozzle to be not less than 280 mm (nominally 360 mm) 37 (HB Plus 3) 37 (HB Plus 3) above the draining board (height should be increased only if essential for filling 52 (HB Plus 5)
Seite 21
All manuals and user guides at all-guides.com CLAGE 4. Installation Installing an external ion exchanger An external ion exchanger should be used from 10 °dH to reduce limescale deposits in the hot water tank of the appliance and thus extend the maintenance intervals.
Seite 22
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 4. Installation Electrical connection Only by a specialist! Please observe: • VDE 0100 • The installation must comply with current IEC and national local regulations or any particular regulations, specified by the local electricity supply company •...
Seite 23
Note: Water and steam are very hot! Scalding protection The Zip Hydroboil Plus is equipped with a safety function that reduces the risk of acci dental operation of the tap. If scalding protection is active, the safety button “B” on the righthand side of the con...
Seite 24
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 5. Operation The Hydroboil Plus has an LC display with four lateral sensor keys for controlling the setup and operating menus. Main screen The Hydroboil Plus is standard on the main screen. It can display two different modes depending on the settings: 1.
Seite 25
All manuals and user guides at all-guides.com CLAGE 5. Operation Main menu Settings Press key 1 to enter the main menu. Using the sensor keys, you can select various functions and call up submenus. Depending on the course of the operating steps, the Install symbols for navigation in the main menu on the sensor keys change.
Seite 26
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 5. Operation Energy saving Various energy saving modes can be selected for energyefficient operation. The appli ENERGY MODES ance only holds hot water when it is needed and switches off at set rest periods. Sleep Trigger Sleep Trigger Sleep Action...
Seite 27
Appliance switched on but does not Possible internal error. Contact customer service. heat. If you cannot rectify the fault with the aid of this table, please contact: CLAGE GmbH AfterSales Service Pirolweg 1 – 5 21337 Lüneburg Germany Phone: +49 4131 890140 Fax: +49 4131 890141...
Seite 28
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 7. Cleaning and Maintenance Cleaning The plastic surfaces and taps should be wiped with a slightly wet and hygienic cloth only. Do not use abrasive or chlorinebased cleaning agents or solvents. To prevent damage of the electronic components do not clean the undersink unit and tap with a water jet.
Seite 29
All manuals and user guides at all-guides.com CLAGE 9. Warranty This is a precision unit made of high quality material. It can be expected to function for many years without any problems. No warranty applies to the life of a filter cartridge installed with the unit, as the life of the cartridge depends on the water quality and water consumption rate.
Seite 30
All manuals and user guides at all-guides.com Zip Hydroboil® Plus Table des contenus 1. Consignes de sécurité ..................31 2.
Seite 31
Les instructions dans les notices jointes à l’appareil correspondent à l’état tech nique de celuici. La dernière édition à jour de la présente notice est disponible en ligne à l’adresse : www.clage.de/ downloads • Prudence lors du levage. Le dispositif est lourd et ne devrait jamais être levé par une seule personne, pour des raisons de sécurité.
Seite 32
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 2. Description du dispositif Le Zip Hydroboil® Plus est un distributeur automatique électronique d'eau bouillante pour des besoins importants en eau bouillante dans les kitchenettes, les cantines ou les restaurants. Le système à deux compartiments avec conteneurs en acier inoxydable empêche le mélange de l'eau d'alimentation et de l'eau bouillante et garantit ainsi que l'eau est toujours captée à...
Seite 33
All manuals and user guides at all-guides.com CLAGE 4. Installation Vis borgnes Armature de robinet Couvercle du dispositif Bornes électriques Panneau de commande Délestage de traction (passecâble) Orifice de sortie À respecter : • VDE 0100 • EN 806 • Prescriptions des entreprises locales d’approvisionnement en énergie et en eau •...
Seite 34
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 4. Installation Monter l’appareil Données en mm • Le bord inférieur du bec doit être à au moins 280 mm (360 mm nominal) audessus 37 (HB Plus 3) 37 (HB Plus 3) de la plaque d'égouttage.
Seite 35
All manuals and user guides at all-guides.com CLAGE 4. Installation Installation d’un échangeur d’ions externe Un échangeur d’ions externe doit être utilisé à partir de 10 °dH, pour réduire l’en tartrage du réservoir d’eau chaude et ainsi allonger les intervalles de maintenance.
Seite 36
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 4. Installation Raccordement électrique Hydroboil 15, 25 Uniquement par un spécialiste ! À respecter : • VDE 0100 • Prescriptions des entreprises locales d’approvisionnement en énergie et en eau • Données techniques et indications sur la plaque signalétique •...
Seite 37
Conseil : L’eau et la vapeur sont très chaudes ! Protection anti-brûlure Le Zip Hydroboil Plus est équipé d'une fonction de sécurité qui réduit le risque de fonc tionnement accidentel du robinet. Si la protection antibrûlure est active, le bouton de sécurité « B » sur le côté droit du Protection anti-brûlure...
Seite 38
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 5. Fonctionnement L'Hydroboil dispose d'un afficheur LC avec quatre touches à capteurs latérales pour la commande des menus de configuration et de commande. Écran principal L'Hydroboil Plus est standard sur l'écran principal. Ceci peut mapper deux modes diffé rents selon les réglages : 1.
Seite 39
All manuals and user guides at all-guides.com CLAGE 5. Fonctionnement Menu principal Réglages Tapez sur le bouton de commande 1 pour accéder au menu principal. À l'aide des touches, vous pouvez sélectionner différentes fonctions et appeler des sousmenus. Les Configurer symboles de navigation du menu principal des touches à...
Seite 40
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 5. Fonctionnement Économie d’énergie Différents modes d'économie d'énergie peuvent être sélectionnés pour un fonctionne ment économe en énergie. L'appareil ne conserve l'eau chaude qu'en cas de besoin et s'éteint à des temps de repos définis. Mode déclenchement Ici, vous pouvez activer / désactiver le mode d'économie d'énergie, ainsi que définir la MODES D’ÉCONOMIE D’ÉNERGIE...
Seite 41
à plusieurs reprises. L'appareil est allumé mais ne chauffe pas. Erreur interne possible. Contacter le service aprèsvente. Si le dysfonctionnement du dispositif continu, veuillez vous adresser à : CLAGE GmbH S.A.V. Pirolweg 1 – 5 21337 Lüneburg Allemagne Tél : +49 4131 890140...
Seite 42
All manuals and user guides at all-guides.com Zip Hydroboil® Plus 7. Maintenance et entretien Nettoyage Seulement essuyer les surfaces de l’appareil et de la robinetterie avec un chiffon humide et impeccable du point de vue hygiénique. Ne pas utiliser des détergents abra sifs ou contenant des solvants ou du chlore.
Seite 43
All manuals and user guides at all-guides.com 9. Garantie Ce dispositif est un appareil de précision fabriqué à partir de matériaux de haute qualité et devrait prêter des services sans pannes pendant de nombreuses années. Aucune garantie ne couvre la durée de vie d’une cartouche de filtre installée avec le dispositif, étant donné que la durée de vie d’une cartouche peut varier en fonction de la qualité...
Seite 44
All manuals and user guides at all-guides.com CLAGE GmbH Pirolweg 1–5 21337 Lüneburg Deutschland Telefon: +49 4131 8901-0 Telefax: +49 4131 83200 E-Mail: service@clage.de Internet: www.clage.de Technische Änderungen, Änderungen der Ausführung und Irrtum vorbehalten. Subject to technical changes, design changes and errors. Sauf 11.19...