Data Logger & Interval Setup; Auto Store - Dostmann Sl323 Bedienungsanleitung

○
Tripod mounting thread:
12
For long-term measurements, the unit can be mounted on a camera tripod.
Proceed carefully, to avoid dropping the unit.
○
Battery compartment.
13
6. DATA LOGGER & INTERVAL SETUP
How to store data in memory.
Auto store Interval time setup:

6.1 Auto store:

Auto store Interval time setup:
When one presses the
values are stored in a memory location. Press
recording.
Note: During recording period, most of the buttons such as the
are inoperative. All other settings must be made before starting the
record operation.
LCD will show FULL symbol when 64,000 recorders are stored in memory.
(1) Press and hold "
meter.
(2) Press INTV(
well as a flashing second display.
(3) Now set the desired recording interval in minutes and
seconds. Press ▲ (
decrease number, Max 1 minute can be set. The minimum
value is limited to "00:01"(=1s). After setting has been
performed, actuate the press INTV(
back to the display of the instantaneously measured values.
If you want abort during a setup process, press
to cancel.
button starts saving the measured values .The
" button and then power on the
) button, " Int " appears for interval, as
) or ▼ (
24
Sound Level Meter
) to increase or
) button once, to get
button
button again will stop
, ,