Memory Function; Data Transfer - Laserliner Distancemaster Compact Plus 50 Bedienungsanleitung

Min/max continuous measurement:
Device on Press for 3 seconds Stop
then release button
1 sec 3 sec
1x 2x 3x
The LC display shows the max value, the min value and the current value.

Memory function:

The device has 50 memory locations.
Confirm Stop
1x 1x
Enable Digital Connection:
When enabled the Digital Connection symbol appears on the display (f).
When the function is active, a mobile device can connect by means
of an app to the measuring device.

Data transfer

This device has digital connectivity which allows wireless data transfer to
mobile devices such as smart phones or tablets with a wireless interface.
The system prerequisites for a digital connection are specified at
https://packd.li/ble/v2
This device can generate a wireless connection to devices which
are compatible with the wireless standard IEEE 802.15.4. The wireless
standard IEEE 802.15.4 is a transfer protocol for Wireless Personal Area
Networks (WPAN).
The range is set to a maximum distance of 10 m from the terminal
device and greatly depends on the ambient conditions such as the
thickness and composition of walls, sources of interference as well
as the transmit / receive properties of the terminal device.
12
EN