Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
Erase function without PC
1.
Connect the power supply to the DC jack of the docking station and connect
the power supply to the socket-outlet.
2.
Insert one or two SSDs which you want to erase into the docking station.
3.
Set the switch to the position "Erase".
4.
Switch on the Docking Station.
5.
The LED on the appropriate slots lights up.
6.
Press the "Start" button for about 3 - 5 sec. in order to activate the Start
process.
7.
Select the desired erase mode (see table) by pressing the "Start" button. The
LED on the process indicator is flashing.
8.
Press the "Start" button again for about 3 - 5 seconds to start the erase
process.
9.
The blue LED indicates the erase process.
10. The erase process is completed as soon as all LEDs light up blue.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 10/2024
-5-
Werbung
