DeLOCK 64300 Bedienungsanleitung Seite 2

English
Description
This M.2 docking station by Delock enables the installation of two M.2 PCIe
NVMe SSDs and it can be connected via USB to the PC or laptop. The included
USB cable allows the connection to a free USB-C™ port.
Clone and erase function
The clone function enables to copy the content of one SSD to another without
using a PC. No connection to the computer is required for the erase function.
Selectively one drive or two drives can be deleted at the same time. Further
different erase modes are available.
Ideal test equipment
The memory is simply plugged into the robust housing and can be used
immediately. No screws, tools or accessories are required, which means that the
SSD can be changed quickly.
Technical details
• Connectors:
1 x USB 20 Gbps USB Type-C™ female
2 x M.2 key M slot
1 x DC jack
• Chipset: JMicron JMS586U
• Supports M.2 modules with key M or key B+M based on PCIe (NVMe)
• Supports NVM Express (NVMe)
• Data transfer rate up to 20 Gbps
• Supports UASP
• Supports TRIM
• LED indicator for power, access and copy / erase status
• Function key:
1 x switch for mode
1 x Clone button
1 x On / Off switch
• Bootable
• Dimensions (LxWxH): ca. 80 x 80 x 33 mm
• Hot Plug, Plug & Play
-2-