Environment Concerns - IKEA FRAMTID HGC4K Bedienungsanleitung

ENGLISH
Only an authorized service engineer can in-
stall, connect or repair this appliance. Use on-
ly original spare parts.
Electrical connection
Before connecting, check that the nominal volt-
age of the appliance stated on the rating
plate, corresponds to the available supply
voltage. Also, check the power rating of the
appliance and ensure that the wire is suitably
sized to suit the appliance power rating (re-
fer to the Technical data chapter).
The rating plate is located on the lower cas-
ing of the hob.
The appliance is not provided with mains ca-
ble. Buy the right one from specialized deal-
er. Single-phase or two-phase connection re-
quires the mains cable of type H05 BB-F/
H05V2V2-F Tmax 90°C (equal or higher).
The appliance works perfectly on AC 230 V,
AC220V~ or AC240V~ 50Hz electrical net-
work.
You must have the means for disconnection in-
corporated in the fixed wiring. Have the ap-
pliance connected to the mains using a de-
vice that allows the appliance to be discon-
nected from the mains at all poles with a con-
tact opening width of at least 3 mm, eg. auto-
matic line protecting cut-out, earth leakage
trips or fuse.

Environment concerns

The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
You must have the connection and the con-
necting links carried out as shown in the con-
nection diagram (it is located on the under-
neath surface of the casting of the hob).
The earth lead is connected to terminal
marked with the symbol
ger than leads carrying electric current. Tight-
en the terminal screws securely! Finally, se-
cure the connecting cable with the mains ca-
ble cleat and the covering closed by pressing
firmly (lock into place).
Warning! Once connected to the mains
supply check that all cooking zones are
ready for use by briefly setting each to
maximum power.
your household waste disposal service or the
shop where you purchased the product.
Packaging materials
The materials with the symbol
ble. Dispose the packaging in a suitable col-
lection containers to recycle it.
Before disposal of appliance
Warning! Do these steps to dispose the
appliance:
• Pull the mains plug out of the mains socket.
• Cut off the mains cable and discard it.
9
and must be lon-
are recycla-