Lutron Homeworks Interactive HWI-2B Installationsanleitung Seite 3

Figure 1: HomeWorksø InteractiveTM Processor
Keypads can be connected to any ot
these three terminals depending on
the configuration of the HomeWork%
Figure 2: Rear View of Keypad
4
3
2
COM
3
2
PELV (Class 2: USA)
Wiring connections from customer supplied
contact
Notes:
1. Switch inputs must be dry momentary
2. Switch
3. Momentary
LUTRON@
Interactiverv Utility
MUX
PELV (Class 2: USA)
MUX
Wiring connections to HomeWorks.
+15V
Interactiveru Panel or other keypads
COM
closures
contact closures.
closures must be from common
the selected button.
switch inputs require a
minimum closure time of 40 msec.
with HWl-2B Keypads
Pins I & 2 - I pair No. 18 AWG (I .omm2) for power
Pins 3 & 4 - 1 pair NO. 18-22 AWG (I.o-
Figure 3: DIP Switch Location (Front
View)
o
o
to
0.5mmZ)
twisted/shielded for data
DIP switch to configure external input
closure button assignment (see Figure 5)
DIP switch for setting address
3