Playing Video Files Using Your Computer - Azdome M330 Benutzerhandbuch

Free Storage
Display remaining storage space on the memory card.
Format SD Card
The formatting process will make sure that the card's file
system format is optimized for the camera.
Note:
Note: For stable performance, it is recommended that you
format the memory card every 1-2 months.
WiFi Name
Here you can change the WiFi Name in APP, the default
name: M300_*******
WiFi Password
Here you can change the WiFi Password in APP, the default
password: 12345678
Default Settings
Reset the Dash Cam to default settings. Your recordings will
not be affected.
Firmware Version
Here you can check the current firmware version installed on
your camera. You will need this information in the future to
check if newer version of firmware is available.
EN-29

10. Playing Video Files Using Your Computer

1. Remove the microSD card from the dashcam.
2. Insert the card into a microSD card reader and connect it to your
computer.
3. Depending on the pre-installed hard drives, you should be able
to locate the added flash drive as drive "D," "E," or another name.
Once you have located the drive, double-click it to access the file
folders, which include Normal, Event, and Photo.
Normal：Normal recording mode saves video files in a loop,
allowing them to be overwritten when storage space is needed.
Event：In Event recording mode, the video file will be locked and
protected from deletion by the loop recording function.
Photo：This is the folder for storing captured photos.
To play the videos, simply double-click on them.
We recommend using VLC Media Player, which can be downloaded
for free at: www.videolan.org .
EN-30