Notices; Warnings - Autool Svb403 Benutzerhandbuch

NOTICES

Warnings

Before using the borescope, please pay attention to the
following operations:
Do not use our company's camera with host devices from other
manufacturers, even if the interfaces are the same.
Do not use this product in areas that may come into contact
with live cables or electrical objects. Exposed metal parts can
conduct electricity, which may lead to unexpected results.
Keep the product out of reach of children. This product must
not be used for medical or human inspections.
Keep the product clean, avoid prolonged exposure to sunlight,
and prevent direct contact with water, oil, and corrosive liquids.
This device is not waterproof.
Ensure that the steering push rod returns to the neutral
position before removing the flexible tube. Do not forcibly
rotate the dial.
Do not twist or pull on the front curved section of the flexible
tube.
Handle with care; do not excessively bend the flexible tube.
The maximum bending limit is one full circle.
The probe operating
85°C/185°F.
temperature
6
must not exceed