Tips And Assistance; Fault Reporting - Autool Svb403 Benutzerhandbuch

TIPS AND ASSISTANCE

Fault
reporting
●
Charging:
Use a 5V adapter or power bank to connect via the Type-C
USB cable for charging. The charging voltage and current are
5V/1A. Using a higher voltage may damage the device.
Please note: This device does not support fast charging.
Fault
phenomenon
Unable to
power on
Automatic
shutdown
Memory card
error message
Unable to
charge
Blurry image
Memory card
recording failure
Cause analysis
Battery is
discharged
Insufficient
battery power
or automatic
shutdown is set
Memory card is
not properly
installed
Charging port is
dirty or charging
cable is damaged
Lens is dirty
Insufficient
memory card
capacity
11
Troubleshooting
solutions
Charge the
borescope
Charge the bores-
cope and disable
the automatic
shutdown setting
Reinstall the
memory card
Replace the
charging cable
Use a cleaning
cloth to clean
the lens
Replace the
memory card or
clear files