Getting Started; Access Codes - LG U8290 Benutzerhandbuch

Getting Started

Turning your handset on
Ensure that your SIM card is in your handset and the
battery is charged.
Press and hold the
Enter the SIM PIN code that was supplied with your
SIM card if PIN code setting is on.
After a few seconds you will be registered on the
network.
Turning your handset off
Press and hold the
There may be a few seconds delay while the handset
powers down.
Do not re-power the handset during this time.

Access Codes

You can use the access codes described in this
section to avoid unauthorized use of your phone. The
access codes (except PUK and PUK2 codes) can be
changed by using the Change codes feature [Menu
9.7.5].
18 18
key until power is on.
key until power is off.
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code
protects your SIM card against unauthorized use. The
PIN code is usually supplied with the SIM card. When
the PIN Code Request is set to Enable, your phone will
request the PIN code every time it is switched on.
When the PIN Code Request is set to Disable, your
phone connects to the network directly without the
PIN code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some SIM cards, is
required to access functions such as Fixed Dial
Number. These functions are only available if
supported by your SIM card.
PUK code (4 to 8 digits)
The PUK (PIN Unblocking Key) code is required to
unlock a blocked PIN code. The PUK code may be
supplied with the SIM card. If not, contact your
network operator's customer service for the code.
If you lose the code, contact your network operator's
customer service.