Device Functions - Navitel R37 Gps Bedienungsanleitung

Device functions

Format SD-card
Video recording
Loop recording
Audio recording
Stamp
G-sensor
Parking mode
GPS location
Permissible speeding
Mobile App support
Formatting a microSD card in the DVR is necessary for the correct operation of the device. Before using a
microSD card or in case of data error, please format the microSD card. To format your SD-card select Format
SD-card item in Menu mode and confirm the action.
When connected to a power source, the device will turn on and start recording automatically. Click the OK
button to stop recording. Press the OK button again to record a new video. Each video is saved automatically.
This feature allows you to save a video as a set of files given in the duration menu. If the memory card runs out
of space, the unprotected files will be overwritten in the order in which they were created.
Record video with or without sound.
This function adds date stamp to the record.
In case of a road incident, the DVR will automatically lock the current video. Protected files can not be deleted
or overwritten.
In parking mode, the user has access to the "Impact Control" mode, based on the operation of the
G-sensor. When it is triggered, an emergency file is written.
Device can show longitude, latitude and other information about your current location. Go to Settings and
press GPS Status to check GPS data.
Permissible excess of the speed limit set on the road section. Adjust the desired speeding permission in DVR
settings. Available range: from -5 km/h to +25 km/h in increments of 5 km/h. You will hear an audio alert
when exceeding the set speed limit.
You can watch and share videos and photos taken by DVR via the Navitel DVR Center application on your
smartphone. Downloadable app connects your phone with the DVR through Wi-Fi network.
NAVITEL R37 GPS | 23
EN