Navitel R37 GPS Bedienungsanleitung Seite 22

22 | USER MANUAL
Installation
1. Insert the microSD card into the DVR. Use a high-speed SD card (Class 10 or above). Capacity should be within 8-256 GB range.
• To avoid malfunctions of the DVR and/or SD-card, don't insert and remove SD-card during DVR operation
• Before using a microSD card, please format it inside the DVR to avoid data errors.
• To format a microSD card, select Format SD-card item in DVR menu and confirm the action.
2. Secure the device on the windshield using the mount.
EN
3. Connect the car charger to the cigarette lighter socket.
4. Connect the car charger to the DVR.
5. Adjust the camera position.
6. Make sure the device is installed correctly, turn the power on. The device will start up and begin recording.
Precautions
• Use only the original charger adapter. Using another adapter may negatively affect the device's battery. Use accessories that are approved by
manufacturer
• Acceptable ambient temperature in operating mode: -10°С to 70°С. Storage temperature: -20°С to 80°С. Relative humidity: 5% to 90% without
condensation (at 25°С).
• Keep the device away from fire sources to avoid explosion or fire.
• Do not expose the device to physical impacts.
• Avoid contacting the device with sources of electromagnetic interference.
• Keep the lens clean. Do not use chemicals or detergents to clean the product; always turn off the device before cleaning.
• Strictly follow the laws and regulatory acts of the region where the device is used. This device can not be used for illegal purposes.
• Do not disassemble or repair device by yourself. In case of device failure, contact a service center.
NAVITEL s.r.o. hereby declares that the device NAVITEL R37 GPS is compatible with the European directive RED 2014/53/EU.
The full text of Declaration of conformity is available at the following internet address: www.navitel.cz/en/declaration_of_conformity