Device Functions - Navitel R90 4K Bedienungsanleitung

26 | USER MANUAL

Device functions

Format SD-card
EN
Record
Loop recording
Record audio
Stamp
LCD OFF
G-sensor
Parking monitor*
GPS location
Formatting a microSD card in the DVR is necessary for the correct operation of the device. Before using a microSD
card or in case of data error, please format the microSD card. For formatting the SD-card in Menu mode select Format
SD-card and confirm it.
Connect the device to an external power supply and it will start recording automatically. Press the OK button to stop
recording. Press OK again to record another video. Each video will be saved automatically.
This feature allows you to save a video as a set of files given in the duration menu. If the memory card runs out of
space, the unprotected files will be overwritten in the order in which they were created.
Record video with or without sound.
This function adds date stamp to the record.
The device can automatically shut off the screen to reduce power consumption; time interval can be set in the Screen
Saver menu.
If the vehicle is hit by something, the DVR will automatically lock the current video.
In parking mode, the user has access to the following modes: impact control and continuous time-lapse recording.
Parking mode - impact control is based on the operation of the G-sensor: when it is triggered, an emergency file is written.
Parking mode - continuous time-lapse recording. Records video continuously at a user-defined frame rate.
Device can show longitude, latitude and other information on your current location. Go to Settings -> GPS Status to
check GPS dates. Press On in the GPS Stamp option to add GPS information to your files.