Victron energy MPPT 100/50 Handbuch Seite 13

5. Specifications
BlueSolar charge controller
Battery voltage
Maximum battery current
Nominal PV power, 12V 1a,b)
Nominal PV power, 24V 1a,b)
Maximum PV open circuit voltage
Max. PV short circuit current 2)
Peak efficiency
Self consumption
Charge voltage 'absorption'
Charge voltage 'equalization'
Charge voltage 'float'
Charge algorithm
Temperature compensation
Protection
Operating temperature
Humidity
Maximum altitude
Environmental condition
Pollution degree
Data communication port and
remote on/off
Colour
Power terminals
Protection category
Weight
Dimensions (h x w x d)
Safety
1a) If more PV power is connected, the controller will limit input power.
1b) PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter minimum PV voltage is Vbat + 1V.
2) A PV array with a higher sort circuit current may damage the controller.
MPPT 100/50
12/24V Auto Select
720W (MPPT range 15V to 80V)
1440W (MPPT range 30V to 80V)
Less than 10mA
Default setting: 14,4V / 28,8V (adjustable)
Default setting: 16,2V / 32,4V (adjustable)
Default setting: 13,8V / 27,6V (adjustable)
multi-stage adaptive (eight preprogrammed algorithms)
-16mV / °C resp. -32mV / °C
Battery reverse polarity (fuse, not user accessible)
Output short circuit / Over temperature
-30 to +60°C (full rated output up to 40°C)
95%, non-condensing
Indoor, unconditioned
See the data communication white paper on our website
ENCLOSURE
Blue (RAL 5012)
13mm² / AWG6
IP43 (electronic components), IP22 (connection area)
130 x 186 x 70mm
STANDARDS
EN/IEC 62109
50A
100V
60 A
98%
2000m
PD3
VE.Direct
1,25kg
11