Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
What is included in the box
Supply of this TV includes following parts:
•
1x TV
•
1x Remote control
•
2x AAA batteries
Attaching the stand
Please follow the instructions on the last page of this user manual.
Wall mounting the TV
Install the wall mounting bracket to the television as advised by the
bracket manufacturer.
Connections
Connecting external devices - see the last page of this manual.
Getting started - initial set up
1.
If rubber parts, foam parts or tape are attached to the TV frame, please
remove them gently.
2.
Using the antenna cable (not supplied), connect the TV to the antenna
wall socket.
3.
For connecting to the Internet with a wired connection connect a
Cat 5/Ethernet cable (not included) from the TV to your broadband
modem/router.
4.
Insert the batteries supplied into the remote control.
5.
Connect the power cable to the Electrical outlet.
6.
Then press the Standby button to turn on the TV.
7.
After turning the TV on, you will be welcomed by the First Time
Installation menu.
8.
Select a language for the TV menu.
9.
Please set desired settings in remaining screens of First
installation menu.
You can fi nd the Roku TV user guide and more details on setting up the TV
by scanning the QR code below or by following the link:
https://go.roku.com/tvmanual
•
1x TV stand installation packet
•
1x Quick Start Guide
TV control button
The TV is equipped with a single control button located at the bottom of
the LED light.
In standby mode:
Short press TV control button to turn on the TV.
In working status:
• Long press TV control button and the TV will be in active standby for
about 15 minutes. The TV will enter passive standby after this time. On
a Power button press to turn on the TV, the TV will resume instantly if in
active standby or will take few seconds longer if in passive standby.
• Short press TV control button to open the Inputs menu, then you can
short press TV control button to cycle through all items in the order as
they are displayed in the Inputs menu.
Close: Exit the Inputs menu.
Turn off TV: Turn the TV to standby mode.
Blu-ray Player: Access the external device connected through HDMI or
AV terminal.
Live TV: Access the Live TV mode.
Home: Access the home screen.
Connecting to an aerial
To access "over-the-air" broadcast television, the aerial must be connected
to the Live TV input of your Roku TV.
1.
Connect the coaxial cable from your aerial antenna to the "Live TV"
connector on the back of your Roku TV.
2.
Turn on your Roku TV, go to Home and select Live TV. If Live TV is
missing, you can add it by going to Settings > TV inputs > Live TV >
Set up input.
3.
Follow the instructions on the TV screen to complete setup.
Roku® mobile app
To control your Roku device with the Roku mobile app, you must connect
your mobile device to the same wireless network as your Roku device.
The Roku App (Offi cial) on the App Store (apple.com)
The Roku App (Offi cial) - Apps on Google Play
EN
Werbung
