Multi-chopper
WARNING – Danger
of Electric Shock
■
Never immerse the motor unit
and the connecting cable in
water or other liquids and
ensure that these components
cannot fall into water or
become wet.
■
If the motor unit falls into
water while it is connected
to the mains power, pull
the mains plug out of the
plug socket immediately.
Only after this should you
retrieve the motor unit from
the water. Never attempt to
pull it out of the water while
it is connected to the mains
power!
■
Never touch the motor unit
and the connecting cable with
wet hands when the motor
unit is connected to the mains
power.
■
Do not use the motor unit if it
has malfunctioned, has been
dropped or fallen into water
to avoid any hazards. Have it
checked in a specialist work-
shop before using it again.
WARNING – Danger
of Fire
■
Do not connect the device
to a multiple socket together
with other consumers (with
high wattage) in order to
avoid overloading and possibly
a short circuit (fire).
NOTICE – Risk of Damage
to Material and Property
■
Only connect the device to a
plug socket that match the
technical data of the device.
■
Use only original accessories
from the manufacturer in
order to guarantee that
there is no interference that
may prevent the device from
working and to avoid possible
damage.
■
Do not operate the device
without any contents to
prevent overheating.
USE
Please Note!
■
Clean the accessories thor-
oughly before using them for
the first time to remove pos-
sible production residues (see
the "Cleaning and Storage"
chapter).
■
Only use the device if it is
undamaged. It can only be
switched on if all parts are
assembled correctly.
■
Never connect the blade
insert to the motor unit on
its own, without using the
mixing container!
■
Do not move the device
during use. Always remove
the mains plug from the plug
socket and allow the motor to
come to a complete stand-
still before transporting the
device.
■
The device is not suitable for
constant operation. Operate
the device for no more than
15 seconds without inter-
ruption to prevent the motor
EN
13