Using The Air Compressor - Ronix Rc-1010 Bedienungsanleitung

NOTE:
When the compressor is in the ON position, the air compressor will
automatically turn back on when the designated tank air pressure
limit. It will also shut off again when the desired limit. It will also shut
off again when the desired pressure is reached.
WARNING!
Never exceed the air tool's pressure rating as recommended by
the manufacturer. When using this air compressor as an inflation
device, always follow the maximum inflation guidelines stated
by the manufacturer of the item being inflated.
WARNING!
Always ensure the switch is in the OFF (O) position and the regulator
pressure gauge reads zero before changing air outlet. Failure to do so
could result in possible serious personal injury.

USING THE AIR COMPRESSOR

1) Ensure power switch is in OFF (O) position and air compressor is
unplugged.
2) If not already installed, attach hose to compressor
3) Attach 6.35 mm (1/4 in.) NPT quick- connect air fitting to accessory or tool
you intend to use.
4) Insert the other end of the quick connect air fitting to the quick coupler on
the open end of hose.
28
Air Compressor 10L