Ronix RC-1010 Bedienungsanleitung Seite 28

CHECKING THE OIL
Always check the oi; when the unit is sitting on a level surface and
before first use.
1) The sight glass is located above the tank. There is a red dot in the
center of the glass.
2) An oil level at the top of the red dot indicates oil is at maximum level.
3) An oil level at or below the bottom of the red dot indicates oil is below
desired level, and oil should be added.
TO ADD OIL
1) Unscrew the cap of oil fill hole.
2) Using a funnel, carefully pour oil into the oil fill hole.
3) Tighten the cap securely into the oil fill hole.
NOTE:
Avoid too much oil. Ensure that the level of the oil does not exceed the top
of red dot at sight glass.
APPLICATIONS
Air compressors are utilized in a variety of air system applications.
Match hoses, connectors, air tools, and accessories to the
capabilities of the air compressor.
26
Air Compressor 10L